Description
Overview
Adapter cable that converts a PH2.0 2-pin connector to an XT60 or XT30 plug. It lets small electronics fitted with PH2.0 sockets connect to the XT-series connectors used on lithium battery packs and chargers, without cutting or re-soldering the original wiring.
Specifications
- Connector combination: PH2.0 2-pin (white) on one end; XT60 or XT30 on the other
- Wire: 22AWG silicone wire, red and black (marked 200°C)
- Available styles:
- PH2.0 female to XT60 male
- PH2.0 male to XT60 female
- PH2.0 male to XT30 female
- PH2.0 female to XT30 male
- XT housing: yellow flame-retardant nylon with gold-plated contacts
- PH2.0 housing: white 2-pin shrouded connector
Purpose
PH2.0 and XT60 / XT30 are two unrelated connector families that frequently appear on opposite sides of the same project — a flight controller or small board on one side, a lithium pack or charger on the other. This adapter bridges the two so the connection can be made without altering either device.
Applications
- RC models and drones — linking PH2.0-equipped boards or accessories to XT30 / XT60 batteries
- Small lithium battery packs and chargers
- Bench testing and breakout adapters
- DIY power leads where a PH2.0 device must feed off an XT-series pack
How to Use
- Check the connector on each side of your project, then order the style that matches both — male and female ends are not interchangeable.
- Observe polarity: red is positive, black is negative. Confirm this against your device before first power-up.
- Push the PH2.0 housing fully onto its header until it latches, and seat the XT connector until it clicks home.
- Mind the wire gauge. The 22AWG conductor is the limiting element of this lead — although XT60 and XT30 connectors are rated for far higher current, keep the actual load modest and well within what 22AWG can carry safely.
- Insulate any exposed solder joints and check the connectors for heat after the first run.
- Connector Combination: One end with PH2.0mm white 2-pin terminal connector, the other end with XT60 or XT30 male/female plug, multiple combinations available.
- Wire Spec: 22AWG silicone wire, red & black wires for positive and negative polarity identification.
- XT Plug Material: Flame-retardant nylon housing, gold-plated copper pins, low resistance, anti-oxidation, reverse polarity protection design.
- PH2.0 Terminal: White plastic housing, gold-plated metal spring contacts, 2.0mm pitch, small PCB plug-in connector.
- Wire Feature: Flexible silicone cable, bend-resistant and high-temperature resistant, designed for low voltage & small current power supply.
- Function: Adapter cable for different power connectors, to realize connection between PH2.0 terminal and XT series RC plu
- Connect PCB / control board with PH2.0 socket directly to lithium batteries or chargers with XT30 / XT60 connector.
- 22AWG thin silicone wire for low-current power supply. Red and black wires clearly mark positive and negative poles for easy wiring.
- PH2.0 side plugs directly into PCB; XT side supports quick plug & play. No re-soldering required for fast power circuit modification.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.



































Reviews
There are no reviews yet.