Description
Overview
Touch-sensor dimmer switch for DC 5V / 12V / 24V LED lighting, in 10mm and 16mm panel-mount sizes plus a 17mm hole version. A touch on the button switches the lighting on or off and steps the brightness.
Specifications
- Working voltage: DC 5V / 12V / 24V
- Switch type: touch sensor, dimmable
- Mounting sizes: 10mm, 16mm, or 17mm hole
- Colours: black / white
- Connection: pre-soldered leads
- Application: LED tape and low-voltage LED lighting
Purpose
Mechanical switches wear out and cannot dim. A touch sensor gives a sealed, flush control surface with no moving parts to fail, and adds brightness control — useful on LED tape installations where a separate dimmer would otherwise be needed.
Applications
- LED strip and LED tape lighting
- Under-cabinet and display lighting
- Smart home retrofit switches
- Camper, boat and vehicle interior lighting
- Furniture and cabinet lighting
How to Use
- Confirm your lighting runs at 5V, 12V or 24V DC — this switch is not for mains voltage.
- Choose the mounting size to match your panel hole (10mm, 16mm or 17mm).
- Wire the switch in series with the LED load on the positive side, observing polarity.
- Check the switch’s current rating against the total draw of the LED strip.
- Touch to toggle; touch and hold or repeat-touch to step brightness, depending on the unit.
- Lithium equipment: Power switches for power tools, portable power stations and e-bike controllers.
- Small appliance DIY: Modification of vehicle devices, humidifiers, lights and small industrial control equipment.
- Chassis modification: Power start buttons for industrial control boxes, 3D printers and instruments.
- Product assembly: Power start/stop control for smart devices, DIY models and robots.
- Maintenance replacement: Direct replacement for damaged power buttons of old equipment.
Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.







































Reviews
There are no reviews yet.