Enameled Copper Wire Grades Explained: QA-1-155 vs 2UEW vs 1UEW

Markings such as QA-1-155, 2UEW and 1UEW describe the insulation system rather than the copper itself. The right grade affects winding density, solderability, dielectric strength and the temperature a coil can safely withstand.
- QA-1-155 / 2UEW is thin-film, self-solderable polyurethane enamel.
- 1UEW / QA-2 adds mechanical and dielectric protection.
- Temperature class matters more than film thickness in hot applications.
Read the code on the spool
| Marking | Meaning | Practical use |
|---|---|---|
| Q | Enameled-wire series code | Identifies the insulation family |
| A / 1UEW / 2UEW | Polyurethane enamel designation and film grade | Self-soldering, compact coils |
| 155 | Temperature class | Continuous operation below 155 °C |
The bare-copper diameter controls resistance and current capacity. A caliper reading includes the enamel, so the measured outer diameter is slightly larger than the stated wire size.
Thin film versus thick film
Thin film winds tightly and self-solders at a lower temperature, which is why it dominates high-frequency transformers, relays and compact motor coils. Thick film is more resistant to abrasion and voltage stress, but consumes more winding-window space and needs more soldering heat.
Match the grade to the application
- Inductors, relays, small motors: QA-1-155 / 2UEW.
- Vibration or higher voltage: QA-2 / 1UEW when the winding window allows.
- Higher ambient temperature: step up to a class 180 °C or class H enamel.
1kg/roll Enameled Copper Wire 0.04mm 0.2mm 0.3mm 1.5mm Magnet Wire Magnetic Coil Winding For Electromagnet Motor Inductance DIY
1 kg rolls, multiple diameters, copper or red.
500g Copper Wire Magnet Wire Enameled Copper Winding Wire Coil Copper Wire Winding Wire High Temperature Resistance QZY-2/180℃
500 g high-temperature enameled winding wire.
Polyurethane Enameled Copper Wire Varnished Diameter 0.1mm 0.13mm 0.25mm 0.4 0.8 1.3mm QA-1/155 2UEW For Transformer Wire Jumper
0.1–1.3 mm transformer-grade enameled wire.
How to verify a supplier claim
Ask for the measured bare diameter, outer diameter, enamel grade, temperature class and a solder test at a stated temperature. For production, request the same values on the batch inspection record.
Can 2UEW replace QA-1?
For most low-voltage winding work they are practical equivalents. Confirm the outer-diameter tolerance if the coil window is tight.
Need a specific wire diameter?
Send the diameter, colour, grade, temperature class and quantity. We can check stock or quote a production run.
