Description
Overview
Polyurethane enameled copper wire, QA-1/155 grade (equivalent to 2UEW). The polyurethane film is directly solderable at 360–400°C, so terminations can be made without mechanically stripping the enamel. Supplied in 100g spools or in fixed lengths up to 2000m, in diameters from 0.03mm to 1.3mm.
Specifications
- Grade: QA-1/155 (equivalent to 2UEW)
- Insulation: polyurethane enamel, thin film (-1 grade)
- Maximum continuous temperature: 155°C
- Direct solderability: 360–400°C
- Available forms: 100g spools, or 1000m / 2000m lengths
- Available diameters: 0.03 – 1.3mm (see variants)
Purpose
Polyurethane wire exists to make termination easy: the enamel decomposes at soldering temperature, so a joint can be made in one operation without scraping. That matters in production winding where stripping thousands of ends by hand is the slowest step. It also has low dielectric loss, which suits high-frequency coils.
Applications
- High-frequency transformers and inductors
- Relay and contactor coils
- Small motors and voice coils
- Instrument and meter coils
- Hand-wound electromagnets and DIY coils
How to Use
- Pick the diameter from your current and turns requirement; the length variants suit continuous winding, the 100g spools suit small jobs.
- Wind with the spool upright so the wire falls off without twisting.
- Terminate by soldering at 360–400°C — the enamel breaks down and the joint forms in one step.
- Keep the finished coil below 155°C in continuous operation.
- Handle fine gauges gently; the enamel is thin and abrasion creates pinholes.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.




































Reviews
There are no reviews yet.