Description
Overview
Magnetic Pogo Pin connector pair available in every pin count from 2 to 12, rated at 2A per contact. The magnet aligns the two halves automatically, so a multi-pin connector can be mated blind without lining up the pins by eye.
Specifications
- Pin counts: 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 pin
- Rated current: 2A per pin
- Contact type: spring-loaded Pogo Pins
- Mating: magnetic self-alignment, blind insertion
- Supplied as: male + female pair
Purpose
As pin count rises, manual alignment becomes the bottleneck. With 2A per contact and up to 12 contacts, this connector can carry combined power plus a useful number of signal lines while still being dockable one-handed.
Applications
- Multi-signal docking for handheld terminals and tablets
- Battery modules and detachable power packs
- Test fixtures needing repeated quick connection
- Medical and industrial portable instruments
- Custom docking stations for consumer electronics
How to Use
- Allocate the pins: decide which carry power and which carry signal, then choose the pin count with a little headroom.
- Keep the 2A per-pin limit in mind — distribute larger currents across several pins rather than overloading one.
- Solder both halves with an identical pin map, and note the orientation keying so the connector cannot be mated reversed.
- Mount so the faces meet flat and the magnet can self-centre.
- Pull straight away from the mating face to release.
Need help specifying a magnetic connector?
Check pin count, spring force, contact resistance, mating cycles and retention before requesting samples.

































Reviews
There are no reviews yet.