Description
Overview
14AWG adaptor cable rated 15A, converting EC5 or XT90 connectors to DC 5.5×2.1mm or 5.5×2.5mm barrel connectors. Used to feed DC-input devices from a battery pack fitted with a high-current plug.
Specifications
- One end: EC5 or XT90, male or female
- Other end: DC 5.5×2.1mm or 5.5×2.5mm, male or female
- Wire: 14AWG
- Rated current: 15A
- Variants: 16 combinations across EC5 / XT90 and 5521 / 5525
Purpose
High-current battery plugs and small DC barrel inputs live at opposite ends of the connector world. This lead makes the translation so a pack with an EC5 or XT90 can power a device with a barrel input — with 14AWG carrying more current than the thin leads usually supplied with such devices.
Applications
- Powering DC equipment from EC5 or XT90 packs
- Radio, monitor and ground-station power from LiPo packs
- Portable power and emergency setups
- Bench testing devices with barrel inputs
How to Use
- Confirm barrel size and the connector family/gender you need — 16 variants exist for a reason.
- Check the device’s input voltage against your pack; a 4S–6S pack far exceeds a 12V device.
- Verify polarity before connecting.
- Keep the load within 15A and remember the barrel connector is usually the weakest element.
- Connect the battery side first, then the barrel; reverse the order when disconnecting.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.




































Reviews
There are no reviews yet.