Description
Overview
14AWG charging adaptor cable rated 15A, converting an XT90 plug to a DC 5.5×2.1mm or 5.5×2.5mm barrel connector. A narrower, XT90-only version of the EC5/XT90 adaptor family.
Specifications
- One end: XT90, male or female
- Other end: DC 5.5×2.1mm or 5.5×2.5mm, male or female
- Wire: 14AWG
- Rated current: 15A
- Variants: XT90 male to 5521 male, XT90 male to 5525 male, XT90 male to 5521 female, XT90 male to 5525 female, and the corresponding XT90 female versions
Purpose
It connects an XT90-equipped pack to a device or charger with a DC barrel input. Because the cable is 14AWG and rated 15A, it is suited to charging and moderate loads rather than the 90A that the XT90 itself could carry.
Applications
- Charging DC-input devices from XT90 packs
- Powering radios, monitors and test equipment
- Converting battery connectors to barrel inputs
- Portable and field power setups
How to Use
- Confirm the barrel size (5.5×2.1 or 5.5×2.5) and the XT90 gender.
- Check that the device input voltage matches the pack.
- Verify polarity before the first connection.
- Stay within 15A — the XT90’s 90A rating does not apply through a 14AWG lead and a barrel connector.
- Inspect the barrel for heat if running near the limit.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.

































Reviews
There are no reviews yet.