Description
Overview
Magnetic Pogo Pin connector pair rated at 2A, offered in 2, 3, 4, 5, 7 and 8 pin with 2.54mm or 2.80mm pitch. Mounting-ear and right-angle variants are included for tight mechanical layouts.
Specifications
- Pin counts: 2 / 3 / 4 / 5 / 7 / 8 pin
- Pitch: 2.54mm or 2.80mm
- Pin style: straight, or 2.8mm bend-needle (right-angle)
- Body options: plain, or with mounting ears
- Rated current: 2A per pin
- Contact type: spring-loaded Pogo Pins
Purpose
This covers the less common counts — 3, 7 and 8 pin — that appear when a design needs a couple more signal lines than a 2/4-pin part provides but does not warrant a full board-to-board connector. The 2A rating keeps power and signal in one connector.
Applications
- Handheld terminals and portable test instruments
- Battery modules and detachable power packs
- Wearable charging and data docks
- Industrial docking stations and fixtures
How to Use
- Pick the pin count with headroom, then confirm the pitch against your PCB.
- Decide between straight and bend-needle pins based on the clearance inside the enclosure.
- Keep each contact within 2A; parallel spare pins for higher total current.
- Solder both halves with the same pin map and check orientation keying.
- Dock magnetically and pull straight to release.
Need help specifying a magnetic connector?
Check pin count, spring force, contact resistance, mating cycles and retention before requesting samples.
















































Reviews
There are no reviews yet.