Description
Overview
Waterproof magnetic pogo-pin connector pair, sold as a male and a female half that pull together under magnet force. Spring-loaded pins carry DC charging current or low-level signal, and the 360° blind suction mates them in any rotation.
Specifications
- Pins: 3, 4, 5 or 6, as a male/female pair
- Contacts: spring-loaded pogo pins
- Mating: magnetic 360° blind suction, no keying
- Sealing: waterproof body
- Use: DC charging and signal
Purpose
Connections mated daily and exposed to water need contacts that self-align rather than a plug shell that wears out. The pin spread covers a simple charge pair or a multi-line signal run.
Applications
- Handheld instrument charging docks
- Wearable and smart-watch charge contacts
- Outdoor and underwater lighting modules
- E-bike and portable battery packs
How to Use
- Match pin count on both halves; 3, 4, 5 and 6-pin parts do not interchange.
- Solder one wire per rear pad, keeping supply and signal separate.
- Bring the halves together until the magnets seat them flush.
- Buzz every pin with a meter before applying load.
- Stay within the pin and wire current rating — the waterproof seal does not raise it.
Need help specifying a magnetic connector?
Check pin count, spring force, contact resistance, mating cycles and retention before requesting samples.






































Reviews
There are no reviews yet.