Description
Overview
A Type-C female charging jack with an integral snap-groove buckle that clips into a panel cutout. It comes as a 2-pin, 4-pin or 6-pin body, with bare wire tails or pre-terminated PH2.0 or 1.25 leads, rated 3A.
Specifications
- Contact counts: 2, 4 and 6 pin
- Gender: female Type-C socket
- Termination: bare tails, PH2.0 leads or 1.25 leads
- Rating: 3A high current charging
- Mounting: snap groove buckle, no screws
- Colours: black, white
Purpose
Small housings rarely have room for a screw-fixed socket, so the groove lets it click into a moulded slot. The 1.25 and PH2.0 leads drop onto an existing battery header.
Applications
- Speaker and earbud case charging
- Power bank enclosure inlets
- Handheld fans and small appliances
- Lamp and torch bodies
- DIY packs with 1.25 or PH2.0 headers
How to Use
- Pick the pin count: 2-pin for power only, 4 or 6 pin for extra conductors.
- Choose the lead style already on your board to avoid splicing.
- Cut the slot to the buckle width and press in until the groove catches.
- Solder or plug the leads, then tug-test before closing the housing.
- Caution: 3A is the ceiling for the charging pair, and mains must never reach it.
Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.




































Reviews
There are no reviews yet.