Description
Overview
A weld-on USB-C to Type-C PD plug kit for making your own fast-charge cable, rated 100W at 20V 5A. Each pack holds two plug ends with cases, in black or white.
Specifications
- Interface: USB Type-C to Type-C PD plug ends
- Rating: 100W, 20V 5A
- Function: quick charge power and data
- Termination: welding type
- Pack: 2 sets
- Colours: black, white, with case
Purpose
A 100W cable carries 5A through a plug most leads cannot survive, and a moulded end cannot be repaired. These ends rebuild the 20V 5A link at any length you cut.
Applications
- Custom-length laptop charging cables
- Repair of damaged cable ends
- Panel-mounted PD charging inlets
- Dock and hub internal harnesses
- Short PD links inside equipment
How to Use
- Use cable with enough copper for 5A, or the plug will heat even at its rated load.
- Strip and tin the conductors, then solder each cup without distorting the insert.
- Keep the data pair wired if you need data, not charging alone.
- Check for bridges and confirm continuity end to end.
- Fit the case and strain-relieve the entry before the first charge.
- Caution: stay within 20V 5A, and both source and device must support PD to reach 100W.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.





































Reviews
There are no reviews yet.