Description
Overview
Y-shaped battery leads with one connector on the single leg and two on the split, built from XT90, XT60, XT60H, XT30, TRX, EC5 and T-plug ends on 10 or 12 AWG cable. Genders are fixed per variant.
Specifications
- Families: XT90, XT60, XT60H, XT30, TRX, EC5, T plug
- Layout: one to two, Y shape
- Gender: for example XT90 female to two male
- Wire: 10 AWG and 12 AWG options
- Mixed: EC5 to XT60 variants
Purpose
Two packs on one model usually means a soldered Y lead, locking the airframe to one pack type. A pluggable split means the harness changes with the pack setup, and no ESC lead gets cut.
Applications
- Paralleling two packs into one ESC
- Two ESCs from a single pack
- EC5 battery into an XT60 model
- Twin-engine aircraft and boats
- Bench feed across two loads
How to Use
- Identify the source leg and the two load legs before connecting.
- Match the variant to your plug family and gender rather than stacking adapters.
- Parallel only packs of the same cell count, capacity and charge state.
- Feel the plugs after the first loaded run; heat means a poor joint.
- Caution: the wire and plug body set the real limit, so check the connector rating against your pack’s draw.








Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.





























Reviews
There are no reviews yet.