Description
Overview
A three-position rocker switch for hair dryer handles, wired on three pins through ON-OFF-ON positions. It is the trigger-style actuator used to step between heat and speed settings, in red, black or mixed.
Specifications
- Model: ARG-1215
- Contacts: 3 pins
- Positions: 3, ON-OFF-ON
- Actuator: rocker / trigger
- Colours: red, black, mixed
Purpose
Dryer handles need an intermediate setting a two-position switch cannot give: the third pin and centre-off action let one switch choose between two fan or heat circuits. It fills that moulded handle opening, not general duty.
Applications
- Replacing a worn trigger on a dryer handle
- Fixing a dryer that lost its middle setting
- Restoring a travel or salon dryer stuck on full power
- Appliance repair bench stock
How to Use
- Unplug the appliance and photograph the wiring first.
- Sketch which pin feeds the motor and which the heater, so circuits are not swapped.
- Desolder the old switch and clean residue off the terminals.
- Fit it and confirm the rocker reaches all three positions.
- No voltage or current rating is stated here, so fit it only if the part marking matches the dryer’s load; otherwise use a technician.












Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.





























Reviews
There are no reviews yet.