Description
Overview
A 17-piece set of short adapter leads joining a JST plug to a T-plug, XT60 or XT30 head for lithium packs and RC models. Both genders appear at either end, so some leads are male-to-male or female-to-female.
Specifications
- Set size: 17 pieces
- Families: JST, T-plug, XT60, XT30
- Genders: male and female
- Builds: T and XT60 to JST
- Builds: XT30 male to JST female, XT30 female to JST male
Purpose
Packs, chargers and ESCs rarely share a plug, and cutting a factory lead wastes the connector. These join the two without soldering, and the same-gender builds cover joins a normal pair would block.
Applications
- Charging a JST pack on a T-plug charger lead
- Running an XT60 battery into an XT30 ESC
- Bench supply to a small model harness
- Test rigs that swap several pack types
How to Use
- Identify the plug on the pack and device, then pick the lead bridging both.
- Check polarity with a meter first; a reversed adapter looks identical.
- Push each connector fully home; a half-mated XT plug heats at the contacts.
- Support the joint so vibration does not load the solder tabs.
- Match the adapter to your pack and ESC current; never use a lead instead of a rated connector.







Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.




























Reviews
There are no reviews yet.