Description
Overview
A one-piece adapter joining an XT60 or T-plug battery connector to a JST female socket, with no cable between them. Four builds vary the XT60 and T-plug genders so a lithium-polymer pack can feed a JST-equipped model.
Specifications
- Battery end: XT60 male, XT60 female, T-plug male or female
- Device end: JST female socket
- Form: direct insertion, plugs joined without a lead
- Builds: XT60 M-F to JST-F; T M-XT60F to JST-F; XT-F-XT60M to JST-F; XT M-F to JST-F
Purpose
Packs and receivers seldom share a plug type. This bridges them in one push-fit part, and the mixed genders let a pack presenting either XT60 body be matched.
Applications
- XT60 pack into a JST receiver lead
- Park-flyer airframe wired with a JST harness
- Charging a JST pack from an XT60 charge lead
- Bench-testing a JST device from a large pack
How to Use
- Note the connector on the pack and on the model, then pick the matching build.
- Check polarity with a meter; a reversed adapter still plugs in.
- Press both ends fully home so the XT contacts seat.
- Support it so the wiring does not hang from the JST socket.
- Keep the load inside the JST connector’s own rating; the adapter adds no capacity.







Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.




























Reviews
There are no reviews yet.