Description
Overview
An on/off switch built into an XT or T-plug body, so a battery can be cut off at the plug instead of pulled apart. Rated 15 A on 14 AWG wire and listed in XT30, XT60, XT90 and T-plug bodies.
Specifications
- Rating: 15 A
- Wire: 14 AWG
- Plug bodies: XT30, XT60, XT90, T-plug
- Action: lever on/off
- Class: large-current, high-load switch
- Use: airplane RC, eBike, ESC, engine connections
Purpose
Separating a live connector under load arcs the contacts and leaves a pack armed in the model. The lever gives a dead stop in the plug’s own footprint, and four bodies span small to large packs.
Applications
- Arming switch on a fixed-wing RC airplane
- Battery isolation on an eBike pack
- ESC power cut-off on a test stand
- Engine and starter connection on a large model
How to Use
- Match the body to the plug already fitted on the pack and the ESC.
- Wire it into the positive lead only and check polarity before the first connection.
- Solder the 14 AWG tails with a hot iron and keep joints short.
- Strain-relieve the leads so the lever carries no cable weight.
- Stay within 15 A, above which the switch becomes the weak point, and switch off before changing a pack.
Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.































Reviews
There are no reviews yet.