Description
Overview
Five adapter builds stacking an XT60 or T-plug, an XT90 joint and a JST female socket in one unit. Four put the XT90 mid-chain; the fifth is a straight XT90 male/female to JST female.
Specifications
- JST end: female socket
- XT90 joint: male or female
- Outer end: XT60 or T-plug, male or female
- Straight build: XT90MF-JST-F
- Two-plug builds: XT60M-XT90F-JST-F; XT60F-XT90M-JST-F; XT M-XT90F-JST-F; XT F-XT90M-JST-F
Purpose
A large pack on an XT90 will not meet a JST receiver harness, and hand-soldered step-downs invite polarity mistakes. These take the XT90 pack directly and present the smaller JST socket.
Applications
- XT90 pack feeding a JST receiver
- Charging a JST pack from an XT90 lead
- eBike pack to a JST accessory tap
- One charger shared across plug types
How to Use
- Identify which end is male on the pack and device before choosing a build.
- Ring it out with a meter; the three-body stack hides a reversal well.
- Seat the XT90 joint first, then the outer plug, listening for the click.
- Tie the harness so the stack is not flexed at the JST.
- Match the load to the JST socket rating, not the XT90, and never treat the adapter as raising that limit.
Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.






























Reviews
There are no reviews yet.