Description
Overview
An audio patch lead with a 3.5 mm plug on one end and a Micro connector on the other, sold for karaoke and accompaniment recording. The jacket measures 3.5 mm outside.
Specifications
- Ends: 3.5 mm plug and Micro connector
- Configuration: Micro to 3.5 mm, interconvertible
- Cable outer diameter: 3.5 mm
- Signal: analogue audio
Purpose
A device with only a Micro socket cannot feed the 3.5 mm input on a mixer, camera or speaker, so vocal and backing track get recorded apart. This bridges the two in one run; the slim jacket keeps it light on a mic stand.
Applications
- Karaoke microphone into a phone
- Backing track into a powered speaker
- Camera or mixer 3.5 mm input
- Practice recording of vocals
- Stage monitor fed from a phone
How to Use
- Check which socket the source device has before ordering.
- Seat the Micro end fully; a partial insertion gives noise and dropouts.
- Turn monitoring volume down before powering up, then plug in the 3.5 mm end.
- Set the recording level on a short test take.
- Route the lead away from mains cables and coil it loosely; the jacket is thin.
- Unplug by the connector bodies, not by pulling the cable.
Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.



























Reviews
There are no reviews yet.