Description
Overview
A breakout board built around one DisplayPort connector, full-size or mini, male or female, with contacts brought out to a pin header. A bench fixture, not a consumer adapter.
Specifications
- Connector: DisplayPort, full size or mini
- Gender: male or female at the board end
- Variants: DP male, DP female, mini DP male, mini DP female
- Breakout: PCB header pins
Purpose
It turns a DisplayPort plug into header pins, so a cable or source can be metered instead of slit open. Four variants cover both shell sizes and both genders.
Applications
- End-to-end continuity check on a DP cable
- Bench bring-up of a display source
- Probing single lines with a scope
- Assembling a custom DisplayPort lead
- Kiosk and monitor repair benches
How to Use
- Confirm gender and shell size first; a mini DP male will not mate with a full-size female.
- Seat the plug fully, then press the latch tab before pulling it free.
- Map header pins to connector contacts with a meter before applying any signal.
- Caution: passive board only. It will not protect a source from a miswired header, and it does not convert between display standards.
- Keep leads short when testing; long wires degrade the link.









Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.




























Reviews
There are no reviews yet.