Description
Overview
A 5-pin USB Type-C male plug adaptor with solder terminations instead of a moulded cord, rated for PD 20W charging. Contacts come out to the rear so a wire, cable or PCB edge can be joined on.
Specifications
- Interface: USB 3.1 Type-C, male plug
- Contacts: 5 pins
- Power class: PD 20W high current
- Termination: solder wire and cable
- Mounting: PCB board plug or free lead
Purpose
Moulded Type-C cords fail at the strain relief while the plug is still good. This bare connector keeps the 20W charging path and lets a fresh cable be soldered to the shell.
Applications
- Repairing a frayed Type-C charge tail
- DIY power bank and pack leads
- PCB breakout for a 20W PD input
- Charging cords for small appliances
How to Use
- Strip and tin the wire ends, keeping power conductors short.
- Identify VBUS and GND on the plug before soldering.
- Solder each conductor, then strain-relieve the cable.
- Buzz out the lead and check for bridges between pads.
- Caution: stay inside the 20W PD rating; a 5-pin body offers no SuperSpeed data.
- Test on a current-limited supply first.







Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.




























Reviews
There are no reviews yet.