Description
Overview
A compact DC-DC board that both steps voltage up and down, driving a USB outlet from a 5 V DC feed. Output adjusts from 1.0 V to 24 V, covering the 1.8 V, 3.3 V, 9 V, 12 V and 24 V settings named in the listing.
Specifications
- Output: DC 1.0 V to 24 V, adjustable
- Settings: 1.8 V, 3.3 V, 9 V, 12 V, 24 V
- Input: 5 V DC
- Boards: 3-USB or 4-USB adapter board
- Indicator: red light or green light
- Format: open PCB module with USB outlet
Purpose
One board replaces a drawer of fixed adapters when a build needs several rails from one 5 V source. Boost and buck in one stage matters because half those rails sit above the input and half below.
Applications
- Testing 1.8 V and 3.3 V logic boards
- Running 12 V or 24 V parts from USB power
- Camera and router power tails
- Multi-port charging on a custom panel
How to Use
- Set the target rail before connecting a load.
- Verify with a meter at the output terminals.
- Keep input and output leads short and apart.
- Caution: stay inside 1.0-24 V and never reverse input polarity; either error destroys the module.
- Feel the board at full load and derate if hot.











Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.





























Reviews
There are no reviews yet.