Description
Overview
A two-piece 6.3 mm connector for vehicle and equipment harnesses, sold as a mated male and female pair that push together as a butt joint. It is offered in two wire classes, 2.5 mm2 carrying 25A and 4 mm2 carrying 40A.
Specifications
- Series: DJ7021-6.3-11/21
- Terminal size: 6.3 mm
- Configuration: male and female pair, butt joint
- Variant 1: 13 AWG, 2.5 mm2, 25A
- Variant 2: 11 AWG, 4 mm2, 40A
- Intended wiring: vehicle and high-current equipment harnesses
Purpose
It puts a pluggable joint in a heavy current run where a soldered splice would be permanent, so a harness can be split for service. The 40A build exists for loads that would cook the 25A contacts.
Applications
- Automotive harness repairs
- Electric vehicle accessory wiring
- Battery and ground leads
- Pump, fan and winch feeds
- Trailer and tow wiring
- Equipment power distribution
How to Use
- Choose the variant from the load: 25A for 2.5 mm2, 40A for 4 mm2.
- Strip each wire to the crimp barrel length, matching gauge to variant.
- Crimp with a proper tool and pull-test every joint.
- Push the male and female halves together until they seat fully.
- Caution: stay inside the 25A or 40A rating of the part you ordered, and keep these low-voltage DC connectors off mains circuits.









Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.





























Reviews
There are no reviews yet.