Description
Overview
A Type-C 4-pin female socket for panel or enclosure mounting, with two ears and screw holes for fixing. The mouth takes a USB-C plug either way up and is a straight 180-degree part, not a right-angle one.
Specifications
- Gender: female socket, 4-pin
- Insertion: double-sided, reversible 180-degree
- Mounting: double ear with screw holes
- Function: fast-charging interface
Purpose
It puts a serviceable Type-C charge port on a case that never had one, or replaces a broken socket; the screw ears take plugging load off the solder joints.
Applications
- Adding a charge port to a custom enclosure
- Repairing a device whose socket tore off the board
- Power banks and DIY battery packs
- Panel-mounted charge points on small appliances
How to Use
- Cut the panel opening to the socket body, then mark the screw holes from the part.
- Fix the ears with screws before soldering so the body cannot shift.
- Solder the 4 pins to your power wiring; this layout carries charging lines, not the full USB-C signal set.
- Check continuity and polarity with a meter before applying power.
- Do not assume a fast-charge rate that the socket and wiring are not rated for.











Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.




























Reviews
There are no reviews yet.