Description
Overview
Solder-free link lead for 4-pin RGB LED strip: one strip feed branches to two, three or four parallel runs. Every end is a plug connection on white-jacketed cable, so sections split without a soldering iron.
Specifications
- Circuit: 4-pin RGB strip
- Split ratios: 1 to 2, 1 to 3, 1 to 4
- Termination: push-on plugs, no soldering
- Cable jacket: white
- Layout: one input tail, multiple output heads
Purpose
RGB strip run around several corners normally needs four pads soldered at every junction, and one bridged pad ruins a colour channel. This replaces those joints with pre-made branches from one controller output.
Applications
- Under-cabinet kitchen lighting
- Cove and ceiling perimeter runs
- Retail shelf and display strips
- TV or monitor backlight kits
- Stair, handrail and toe-kick accents
How to Use
- Confirm the strip is 4-pin RGB, not 2-pin or 5-pin.
- Check the plug style mates with the strip’s pad end.
- Plug the single tail into the controller or strip feed.
- Test colours at low brightness before fixing anything down.
- Keep each branch inside the controller’s output budget.
- Caution: these leads carry low-voltage strip supply only, never mains wiring.







Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.




























Reviews
There are no reviews yet.