Description
Overview
Four-port USB charging outlet for 12–24V vehicle and marine systems: two 30W PD ports, two QC 3.0 ports rated 18W, and a voltmeter in the face. Supplied as a 4-port socket with a wiring tail for a fixed panel install.
Specifications
- Ports: four USB outlets
- PD ports: two, 30W each
- QC 3.0 ports: two, 18W each
- Input: 12V to 24V DC
Purpose
A boat or camper often has one tired outlet for a crew’s phones and tablets. This puts four independent ports in that hole, and the meter shows whether the battery holds up under charge load.
Applications
- Helm and cabin charging on boats
- RV, camper and caravan dash outlets
- Marine fuse-panel and switch-panel upgrades
- Truck and van cab charging for two drivers
- Replacing a single 12V lighter socket
How to Use
- Split devices between the PD and QC 3.0 ports, then check the cut-out size.
- Isolate the battery and run a fused 12–24V feed to the position.
- Crimp the supplied tail, keeping polarity correct.
- Seal the rear of the socket against spray in a marine panel.
- Caution: stay inside 12–24V and the port ratings; a 24V fault carries more current.
- Watch the voltmeter under load to spot a sagging battery.









Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.





























Reviews
There are no reviews yet.