Description
Overview
Screw-terminal adapter that turns a bare multi-core cable into a finished RJ45 or USB-C plug. The 8-position build ends in male or female RJ45; the 5-position build in USB Type-C. All four variants have a 20cm tail.
Specifications
- Terminals: 8 positions, or 5 on the Type-C builds
- Outputs: RJ45 male/female, USB Type-C male/female
- Length: 20cm on every variant
- Termination: screw terminals, no crimp tool
- Head: glass-head body
Purpose
Camera runs often end in a stub with no plug, or a plug too bulky for conduit. Clamping cores one at a time makes the joint at the wall, and the short tail keeps slack in the box.
Applications
- DVR and NVR camera drops
- Re-terminating a cut Cat5/Cat6 run
- CCTV test-bench leads
- USB-C feeds on a 5-core line
How to Use
- Match the variant to the port: RJ45 male, RJ45 female, or Type-C.
- Strip the jacket and fan out the cores.
- Seat one core under each screw in your RJ45 pin order, then tighten.
- Buzz out continuity end to end before the cable goes up a pole.
- Caution: no voltage, current or data-category rating is stated here, so keep it to signal-level camera and USB wiring.









Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.




























Reviews
There are no reviews yet.