Description
Overview
Adapter lead that turns a hobby charger’s 4.0mm banana output into the plug a LiPo pack uses. It is 20cm of 14AWG silicone wire (the XT60 version also at 30cm), and eight endings cover XT30, XT60, EC3, EC5, Tamiya, TRX and T-plug packs.
Specifications
- Length: 20cm, or 30cm for XT60 to 4.0mm
- Wire: 14AWG silicone-insulated
- Charger side: 4.0mm banana plug
- Battery side: XT30, XT60, EC3, EC5, Tamiya, TRX, T Plug
Purpose
A charger has one output; a battery drawer holds six plug types. This bridges the two without resoldering, and silicone stays supple where PVC stiffens.
Applications
- Packs on a 4.0mm banana charger output
- XT60 and XT30 air and car packs
- EC3 and EC5 boat and truck packs
- Tamiya and TRX vehicle packs
- T-plug packs
- Bench discharge and storage checks
How to Use
- Match the battery-side plug and push it fully home.
- Check charger polarity before plugging in.
- Set the charge current on the charger, not the lead.
- Keep the lead uncoiled and clear of the pack.
- Caution: no voltage or current rating is printed; stay inside the 14AWG wire and plug limits and the pack’s charge rate.
- Retire it if the jacket is cut or a plug works loose.












Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.




























Reviews
There are no reviews yet.