Description
Overview
XT60 male-to-female extension cable made from 12AWG silicone wire. It adds length between an XT60 battery pack and the device or charger it feeds, without re-soldering the original connectors.
Specifications
- Connector: XT60 / XT-60 male to female
- Wire gauge: 12AWG
- Conductor: stranded copper
- Insulation: silicone rubber — flexible and heat resistant
- Colours: red (positive) and black (negative)
- Available lengths: 10cm / 20cm / 50cm / 100cm
- Housing: yellow flame-retardant nylon, gold-plated contacts
Purpose
XT60 plugs are often too close together or too short to reach comfortably inside a model, and repeatedly re-soldering battery or ESC leads damages them. A pre-made extension cable solves the reach problem and lets you leave the original connectors untouched.
Applications
- RC cars, boats and aircraft — LiPo battery to ESC connection
- Charging leads for LiPo packs
- Extending battery leads inside tight fuselages or chassis
- Bench testing batteries and power equipment
How to Use
- Pick the length that gives you enough slack without leaving excess cable to snag.
- Connect the male end to the battery and the female end to the ESC, charger or load.
- Observe polarity — XT60 housings are keyed, but confirm red-to-red and black-to-black before connecting.
- Check the connector is fully seated; a partially inserted XT60 will heat up under load.
- Keep the current within the 12AWG rating for your run length.

Need help specifying wire?
Review conductor size, insulation, voltage drop, winding requirements and inspection criteria.



























Reviews
There are no reviews yet.