Description
Overview
Round panel-mount rocker switch with a built-in LED indicator. It is a 3-pin, two-position (ON/OFF) switch with a threaded body that mounts through a drilled panel hole and is secured from behind with a nut.
Specifications
- Type: round rocker switch, 2 positions (ON / OFF)
- Terminals: 3 pins
- Rating (as marked on the product): DC 12V 20A / DC 24V 10A
- Alternative rating shown in the listing: DC 5V / 9V / 12V / 24V, 10A / 20A
- Illumination: built-in LED, available in red / blue / green
- Mounting: threaded body with locking nut, panel mount
- Housing: black plastic, marked “ROCKER SWITCH”
- DC only — not suitable for AC mains switching.
Purpose
It provides a single, obvious on/off control for a DC circuit, with the LED showing at a glance whether the circuit is live. The round threaded body means it can be fitted to a simple drilled hole without needing a rectangular cut-out.
Applications
- Car dash and centre console accessory switches
- Boats, RVs, caravans and trucks
- Motorcycle and scooter modifications
- 12V / 24V lighting, fans, pumps and auxiliary circuits
How to Use
- Drill a panel hole to match the threaded body of the switch, then insert the switch from the front and tighten the nut from behind.
- Identify the terminals. On illuminated 3-pin rocker switches one leg is the LED return — follow the wiring diagram supplied with your unit, as terminal order varies between batches.
- Wire the switch in series with the load on the positive side of the circuit.
- Connect the LED return leg so the light comes on when the switch is closed.
- Check the current draw of your load against the switch rating — derate for continuous operation and for higher ambient temperatures.
- Never use this switch to interrupt AC mains voltage.
Need help specifying this connector?
Use our practical guides for current and wire selection, connector validation and OEM harness drawings.































Reviews
There are no reviews yet.