Description
Overview
Panel-mount DC charging socket with a waterproof rubber cover, supplied with a matching DC barrel plug and pre-wired leads. It provides a weather-resistant charging inlet for electric bicycles and scooters.
Specifications
- Barrel size: 5.5 × 2.1mm or 5.5 × 2.5mm (outer diameter × inner pin diameter)
- Working voltage: 36V / 48V / 60V DC
- Socket type: panel-mount, round flange
- Cover: hinged rubber / plastic waterproof cap
- Leads: multi-colour flying leads for positive and negative
- Plug: matching DC barrel plug with cable
Purpose
Replaces a broken or missing charging port on a battery pack or frame, and adds a protective cap so water and dust do not reach the contacts when the charger is unplugged. The two available pin sizes let you match the barrel diameter of the charger you already own.
Applications
- Electric bicycle and e-scooter charging inlets
- Lithium battery pack charging ports
- Portable power stations and battery boxes
- Any DC charging point that needs a covered panel socket
How to Use
- Measure your existing charger plug: the outer barrel diameter and the inner pin diameter. Choose 5.5 × 2.1mm or 5.5 × 2.5mm to match.
- Cut the panel opening to suit the socket flange and mount the socket with its cap facing outward.
- Identify the positive and negative leads on both the new socket and the original wiring.
- Solder the joints and insulate them with heat-shrink tubing — this is a high-current DC path, so a poor joint will heat up.
- Confirm polarity with a multimeter before connecting the charger for the first time.
- Close the cap when charging is finished to keep moisture out.
Need help selecting a power connector?
Review the XT/EC5 comparison, wire gauge and the complete OEM sourcing checklist before ordering.






































Reviews
There are no reviews yet.