وصف
ملخص
DC magnetic Pogo Pin connector supplied with a pre-crimped wiring harness, available in 12-pin and 20-pin versions. One half carries spring-loaded gold pins inside a magnetic housing; the matching half docks by magnetic attraction, giving a blind-mate connection that can also be released quickly.
تحديد
- 12-pin version: terminated with XH2.54mm connector, 26AWG wire
- 20-pin version: terminated with MX1.25mm connector, 28AWG wire
- Contact type: Pogo Pin spring-loaded contacts, gold-plated
- Rated current: up to 2A per pin
- Mating: magnetic self-alignment, blind insertion, reverse-insertion protected
- Housing: black engineering plastic base containing the magnet module
- Cable: multi-colour ribbon cable, pre-crimped and ready to plug in
- Carries DC power and multi-channel signals simultaneously
غاية
It removes the alignment problem from multi-pin connections. Instead of lining up a 12- or 20-pin header by eye, the magnet pulls the two halves together in the correct orientation. Because the connection separates under a straight pull, a snagged cable releases instead of tearing the connector off the board — useful on equipment that is docked and undocked many times a day.
التطبيقات
- Portable smart devices — tablets, industrial handhelds, portable detectors (magnetic charging + data)
- Energy storage and battery modules — power banks, robot battery packs, detachable battery units
- Industrial test equipment — test fixtures and jigs requiring repeated quick docking on a production line
- Smart home — magnetic-base devices, robot vacuum charging, desktop magnetic lighting, removable display modules
- Medical equipment — portable instruments needing safe, fast connect/disconnect of power and signal
- Consumer electronics — VR accessories, wearables, magnetic docking stations
كيفية الاستخدام
- Count the lines you need to carry. The 12-pin version gives 12 channels on XH2.54mm; the 20-pin version gives 20 channels on the smaller MX1.25mm.
- Plug the pre-crimped XH or MX housing directly into the matching header on your main board.
- Mount the magnetic half so the two faces can meet flat — the magnet aligns the pins only if the halves are free to self-centre.
- Bring the halves together and let the magnet pull them into position; do not force them at an angle.
- Respect the 2A per-pin limit. For higher total current, distribute the load across several pins rather than overloading one.
- To release, pull straight away from the mating face. The connector is designed to separate rather than damage the device.
Summary of Product Features
Magnetic blind insertion, automatic suction alignment, supports multiple signals and DC power supply, two pin specifications are optional, and comes with a molded terminal harness that can be directly connected to the circuit board. It is suitable for devices that require frequent insertion and rapid disassembly.
هل تحتاج إلى مساعدة في تحديد موصل مغناطيسي؟
تحقق من عدد المسامير وقوة الزنبرك ومقاومة التلامس ودورات التزاوج والاحتفاظ قبل طلب العينات.

































التعليقات
لا توجد تعليقات حتى الآن.