وصف
ملخص
Threaded panel-mount DC power socket in 5.5×2.1mm or 5.5×2.5mm, supplied pre-wired with a protective dust cover. Used as a power input for low-voltage DC equipment and lithium battery packs.
تحديد
- Barrel sizes: 5.5×2.1mm or 5.5×2.5mm
- Mounting: threaded body with nut, panel mount
- Cover: flip protective cap (dust and splash protection)
- Termination: pre-soldered wire
- الجنس: مقبس أنثى
غاية
The threaded body clamps the socket rigidly to the panel, so repeated plug insertion does not loosen it — unlike push-fit sockets. The flip cover keeps dust and moisture off the contacts when the device is not on charge.
التطبيقات
- Lithium battery pack charging inputs
- Electric vehicle and e-bike accessory power
- Low-voltage DC equipment power inlets
- Instrument and enclosure power sockets
كيفية الاستخدام
- Measure your existing plug’s outer and inner diameter and choose 5.5×2.1 or 5.5×2.5 accordingly.
- Drill the panel to the thread diameter, insert the socket and tighten the nut from behind.
- Solder the pre-wired leads to the input circuit, observing polarity.
- Confirm the centre pin polarity on your device before first connection.
- Close the cover when the socket is not in use.
- DIY electronics projects: Power inlet for homemade portable power supplies and LED strips.
- Small appliance modification: Refit power ports for routers, fans, water pumps and vehicle low-voltage devices.
- Lithium equipment: Power sockets for mini portable power stations, electric toys and power tool control boards.
- Repair replacement: Replace damaged original DC jack on various DC powered devices.
- Outdoor equipment: Small outdoor instruments, flip cap reduces dust and rain erosion.
هل تحتاج إلى مساعدة في اختيار موصل الطاقة؟
قم بمراجعة مقارنة XT/EC5 ومقياس الأسلاك وقائمة المراجعة الكاملة لمصادر OEM قبل الطلب.

































التعليقات
لا توجد تعليقات حتى الآن.