Descrição
Visão geral
A rectangular horn loudspeaker for LCD monitors and televisions, rated 2 W at 8 ohm and supplied as a bare driver. Three body lengths are offered – 1837-9mm, 1853-15mm and 2364-18mm – so one design covers several chassis depths.
Especificações
- Power handling: 2 W
- Impedance: 8 ohm (marked 8R)
- Models: 1837-9mm, 1853-15mm, 2364-18mm
- Body sizes: 16 x 35 x 6 mm, 18 x 53 x 9 mm, 23 x 64 x 18 mm
- Form: rectangular horn, wired terminals
Propósito
A panel display leaves only a thin strip beside the main board, where a round cone will not sit. This shallow horn uses that strip and still produces enough output for speech and alert tones.
Aplicativos
- Internal audio in LCD monitors
- Flat-panel television speakers
- All-in-one PCs and POS terminals
- Signage and kiosk screens
- Monitor or TV audio repair
Como usar
- Measure the slot and pick the model that clears nearby parts.
- Confirm the amp channel is rated for an 8 ohm load.
- Keep polarity matching between left and right units.
- Seat the horn against its grille without blocking it.
- Start at low volume, then raise it and listen for buzz at full tilt.
- Caution: stay within 2 W; clipping overheats the coil.
Precisa de ajuda para especificar este conector?
Use nossos guias práticos para seleção de corrente e fios, validação de conectores e desenhos de chicotes OEM.
































Comentários
Ainda não há comentários.