Descrizione
Panoramica
Round panel-mount rocker switch with a built-in LED indicator. It is a 3-pin, two-position (ON/OFF) switch with a threaded body that mounts through a drilled panel hole and is secured from behind with a nut.
Specifiche
- Type: round rocker switch, 2 positions (ON / OFF)
- Terminals: 3 pins
- Rating (as marked on the product): DC 12V 20A / DC 24V 10A
- Alternative rating shown in the listing: DC 5V / 9V / 12V / 24V, 10A / 20A
- Illumination: built-in LED, available in red / blue / green
- Mounting: threaded body with locking nut, panel mount
- Housing: black plastic, marked “ROCKER SWITCH”
- DC only — not suitable for AC mains switching.
Scopo
It provides a single, obvious on/off control for a DC circuit, with the LED showing at a glance whether the circuit is live. The round threaded body means it can be fitted to a simple drilled hole without needing a rectangular cut-out.
Applicazioni
- Car dash and centre console accessory switches
- Boats, RVs, caravans and trucks
- Motorcycle and scooter modifications
- 12V / 24V lighting, fans, pumps and auxiliary circuits
Come usare
- Drill a panel hole to match the threaded body of the switch, then insert the switch from the front and tighten the nut from behind.
- Identify the terminals. On illuminated 3-pin rocker switches one leg is the LED return — follow the wiring diagram supplied with your unit, as terminal order varies between batches.
- Wire the switch in series with the load on the positive side of the circuit.
- Connect the LED return leg so the light comes on when the switch is closed.
- Check the current draw of your load against the switch rating — derate for continuous operation and for higher ambient temperatures.
- Never use this switch to interrupt AC mains voltage.
Hai bisogno di aiuto per specificare questo connettore?
Utilizza le nostre guide pratiche per la selezione della corrente e dei cavi, la convalida dei connettori e i disegni del cablaggio OEM.































Recensioni
Non ci sono ancora recensioni