설명
개요
A USB adapter lead that breaks a standard USB connection out to a small wire-to-board connector, with mounting ears on the USB housing. Seven builds cover XH2.54, PH2.0, MX1.25, SH1.0 and DuPont terminations.
명세서
- USB end: with mounting ears
- Variants: USB to DuPont 2.54, USB to DuPont 2.0 5P, USB to XH 2.54 4Pin, USB to PH 2.0 4Pin, USB to PH 2.0 5Pin, USB to MX 1.25 4Pin, USB to SH 1.0 5Pin
- Pitches: 2.54 mm, 2.0 mm, 1.25 mm, 1.0 mm
- Pin counts: 4 pin and 5 pin
- Stated use: motherboard, chassis and touch-screen links
목적
A motherboard header or touch panel will not accept a USB plug directly, so this lead converts one to the other without an adapter board. The eared USB shell gives the run a fixing point at the chassis panel.
응용
- Touch screen to motherboard links
- Front-panel USB to an internal header
- Chassis USB port extensions
- 3D printer and CNC board connections
- Single-board computer accessories
- Repair of a damaged internal USB run
사용방법
- Open the device and read the header label for pitch and pin count.
- Order the build that matches: 4-pin XH, PH or MX, 5-pin PH or SH, or a DuPont version.
- Route the lead clear of fans and sharp chassis edges.
- Seat the small connector fully and confirm pin 1 orientation twice.
- Fix the eared USB end to the panel, then test before closing the case.
- Caution: a USB link is a 5V signal path, so never tie this lead to a battery or a separate supply.












전원 커넥터를 선택하는 데 도움이 필요하십니까?
주문하기 전에 XT/EC5 비교, 와이어 게이지 및 전체 OEM 소싱 체크리스트를 검토하십시오.




























리뷰
아직 리뷰가 없습니다.